News

PERSONNEL NEWS

as of May 4, 2018, we welcome John Kemp as sales engineer for the territory of Southern Wisconsin and South East Minnesota.

John brings over 20 years of experience in the manufacturing field to the maintecx team.  He has extensive knowledge in manufacturing specifically related to laser processing, bending, programming software, and process improvement.  He joins our team after 16 years with Bystronic Inc. where he took on several roles including Bending Product Manager and Manager of Applications and Training.

John lives in Cary, Illinois with his wife, Erin, and two children, Logan (12), and Ainsley (10).

Find John’s contacts by clicking here

We are thrilled to have John on board!

———————————————————-posted 7/27/2018—————————————————————————

TMCO CELEBRATES OKTOBERFEST #43

TMCO Inc. in Lincoln, NE held it’s annual open house on October 19/20……..Read more…

———————————————————-posted 10/25/2017—————————————————————————

TRUMPF OPENS NEW SMART FACTORY IN CHICAGO

On September 12, 2017, TRUMPF INC. held on opening ceremony for their new Smart Factory in Chicago.
Read more about this event and the state-of-the-art-facility
———————————————————-posted 10/04/2017—————————————————————————

NEW TRUTOOL TSC 100 – TRUMPF SLAT CLEANER

The latest release of the TRUMPF slat cleaner comes equipped with a new robust gearing and motor. An additional feature is the new maintenance LED, an intelligent monitoring system alerting you when it is time to exchange the seals on the TSC 100.
Learn more …
———————————————————-posted 09/29/2017—————————————————————————

LECTURE ON GERMAN DUAL EDUCATION SYSTEM AT ST.PAUL TECHNICAL COLLEGE

The MN Chapter of the German American Chamber of Commere (GACC) held a luncheon on September 27 hosted by Saint Paul College with guest speaker Dr. Christine Benz, Training & Development Manager at TRUMPF Inc.

Learn more…
———————————————————-posted 09/29/2017—————————————————————————

NEW CORDLESS POWER TOOLS BY TRUMPF

TRUMPF uses 10.8 V Li-ion technology with a 2 Ah rechargeable battery as standard, or a 4 Ah rechargeable battery as an option. Here, many details in the gear head are coordinated for the voltage of the battery technology and aid the powerful performance of the rechargeable battery.

Click here to see the brochure for more details

———————————————————-posted 07/27/2017—————————————————————————

 

JONES METAL CELEBRATING THEIR 75th ANNIVERSARY!

On June 8, 2017, Jones Metal celebrated their 75th anniversary on their campus in Mankato, MN. Please click here for details…

———————————————————-posted 06/12/2017—————————————————————————

PERSONNEL NEWS

As of March 13, 2017, we welcome Scott Huck as a new sales engineer.
Scott brings over 20 years experience in the manufacturing field to the maintecx team. He has extensive knowledge of manufacturing specifically within facilities engineering, fabrication, robot welding, topcoat finishing and lean transformation. He joins our team from Worthington Industries Engineered Cabs where he took on several roles including Manufacturing Engineer, Six Sigma Black Belt and Senior Project Engineer. He has an Industrial Engineering Degree from Montana State University.
Scott’s territory covers the state of South Dakota.
We are excited to have Scott on board!

———————————————————-posted 03/17/2017—————————————————————————

 

TRUMPF POWERTOOLS SPECIAL PRICING

Special pricing on select TruTools
Take advantage of discounted pricing on select TruTools and
increase your productivity today. TRUMPF products come with a quality
promise and a 5 year warranty.

This promotion runs until June 30st 2017.

Click here to see the brochure for more details

————————————    posted 01/27/2017      ——————————

 

SHEET METAL DESIGN SEMINAR – THANKS FOR COMING!

Thank you to all of our customers that took part in the Sheet Metal Design Seminar that took place on December 7 in St. Paul, MN and on December 8 in Sioux Falls, SD. The seminar was received as a great opportunity to learn about the new techniques in laser cutting, bending, punching and laser welding. Especially helpful according to the feedback we received were the group exercises that helped to understand the bending and punching tools and their capabilities. The students also enjoyed drawing the best design for a fire grill that would make it the most efficient in mass producing it. The different array of parts that were shown and discussed was another highlight of the class. The customers gained new ideas in part design and intend to present them to their company. We are happy to have perceived such positive feedback and will offer the class again in the future.

Sheet Metal Design Seminar    Sheet Metal Design Seminar Parts Sheet Metal Design Seminar Parts 2

————————————    posted 12/15/2016      ——————————

END OF SUMMER POWER TOOL SALE

We are offering a TRUMPF power tool package that has a list price of $1,500 for $1,250!

There are 2 types of packages and supply is limited.

Package 1965704: TruTool DD1010 with: step drill & 1×4 Ah battery plus TruTool C160 with 2×2 Ah batteries plus 1 charger per package

Package 1965712: TruTool DD1010 with: step drill & 1×4 Ah battery plus TruTool PN130 with 2×2 Ah batteries plus 1 charger per package

Click here to see the flyer for more details

posted 09/22/2016

———————————————————————————————————————————————————-

EXCHANGE THE CUTTERS ON YOUR TRUTOOLS

In this episode, Power Tools Sales Engineer, Tony Mirisola answers the question “How do I change the cutters on my TruTool C 160 and C 250 slitting shears?”

posted 06/14/2016

———————————————————————————————————————————————————-

CUTTING THROUGH THE SLAG

TruTool TSC 100 Slag Removal

 

When a laser is used to cut flat sheet metal, molten material
called slag is produced as a byproduct of the thermal cutting process.
While manufacturers constantly strive to minimize their costs per part,
they often overlook the value of managing slag.

 

image: TRUMPF Power tool TSC 100 Slat Cleaner removing slag

Tony Mirisola who is the product manager for power tools for TRUMPF Inc., has written an informative article on how to efficiently remove the slag. Read it by clicking here.

posted 06/03/2016

———————————————————————————————————————————————————-

Personnel News

As of February, 2016, Kent Kringlund will be handling TruServices throughout the Maintecx region. TruServices are all those things that support Trumpf machine tools – software, tooling, consumables, and service agreements. Each of these is a key component to the long term success of any machine tool. By combining special attention to all these products with our in house service technicians augmenting Trumpf’s service, Maintecx aims to raise the bar in terms of overall customer satisfaction.  We congratulate Kent for his new position!

As of February 8th, we welcome Dave Dehrkoop as a new sales engineer! Dave brings over 20 years experience in the manufacturing field to the maintecx team. He has extensive knowledge of manufacturing and welding specifically within automation development, fabrication, tooling and fixtures, and both manual and robotic welding.  He joins our team from AGCO Corporation where he took on a leadership role and served as the Chief Engineer for Manufacturing and Welding Technology and led an AGCO Global Manufacturing Technology team. He has a LEAN Certification from Kentucky University and is both a Certificated Welding Inspector and Certified Welding Educator issued by the American Society of Welding. Dave serves as the Maintecx Sales Engineer for the Minnesota and Wisconsin territories.

We also welcome Paul Engle as a new field service technician! Paul started with us on March 7th and he will be performing service work mainly in the state of Wisconsin.

posted 3/09/2016

———————————————————————————————————————————————————-

Shop for TRUMPF’s  Powertools on the maintecx online store!

Maintecx has just opened its online store for TRUMPF’s power tools.
Please browse these high-quality tools and move the item(s) of your choice effortlessly into the shopping card.
Purchases can be made online or offline via email.
After placing your order, it will be processed in real time!
Paypal and major credit cards are accepted.

Please go to our store here

posted 12/01/2015

———————————————————————————————————————————————————-

TRUMPF’s Fabtech Powertool Promotion

Please look at TRUMPF’s  powertool promotion for this year’s Fabtech show.  There are 3 different bundles/packages to purchase during the show. All three packages include TRUMPF’s DD 1010 Li-ion Drill. The list price for each package is $1,200, so it is a great deal! 2 tools for $1,200! The promotion starts on Nov. 9th and last until the end of the calendar year and is also available outside of the Fabtech show.

Please click here for a pdf brochure: Fabtech Promotion Flyer

posted 10/05/2015

———————————————————————————————————————————————————-

TRUMPF’s 40th Anniversary Tool Promotion

Please check out  TRUMPF’s punching tool promotion in recognition of their long standing history in punching tool manufacturing in the United States.

Contact your local sales representative or call our office for more details.

Please click here for a pdf brochure:  Promotion Flyer

posted 9/23/2015

———————————————————————————————————————————————————-

TRUMPF’s Power Tool Promotion

Please check out TRUMPF’s Trade-In Inititative for power tools.

Please click here for a pdf brochure:  Promotion Flyer

posted 9/23/2015

———————————————————————————————————————————————————-

TRUMPF’s New Cordless Powertools

Please check out the TruTool DD 1010, TRUMPF’s new cordless drill, and other cordless power tools manufactured with high precision and TRUMPF’s outstanding quality standards. All batteries and chargers are interchangeable between these light weight machines. Please contact our office or one of our sales representative in your area for availability and pricing.

Please click here for a pdf brochure:  Cordless Tools

Please click here for more information on TRUMPF’s web site:  New Cordless Power Tools

posted 5/27/2015

———————————————————————————————————————————————————-

TRUMPF Live Webinar Demonstration

Introducing the TruBend 3100 – The ideal entry into precision bending

March 17, 2015 2:00pm Eastern

Trubend3100a                Trubend3100Control

TRUMPF would like to invite you to participate in a live webinar demonstration of our newest press brake, the TruBend 3100. The newly-redesigned TruBend Series 3000 fits perfectly where precision bending is desired, but part complexity does not require the additional features of higher cost models. A newly designed “O” frame, tablet-style control and the latest generation safety system are just some of the new features that make the TruBend 3100 a great addition to any fabrication facility. Join us for a live webinar demonstration that shows the features and performance of this exciting new press brake. The demonstration should last about 30 minutes and will be followed by a question and answer session.

Webinar requirements:

Browser with Flash installed

Please click here to register

posted 2/26/2015

———————————————————————————————————————————————————-

****Please contact us for our winter special promotion for the TSC 100 slat cleaner!! ****

posted 1/21/2015

———————————————————————————————————————————————————-

TRUMPF’s magazine “Masters of Sheet Metal” describes in an article the efficiency and great performance of the power tool TSC 100, called “the slat cleaner“.

Click image for article

PTool-Slat

posted 12/1/2014

———————————————————————————————————————————————————-

Check out the latest series of cordless TRUMPF  power tools:

cordless powertools

posted 12/1/2014

———————————————————————————————————————————————————-

Check out the newly released TruLaser 3030 with a 4Kw solid state laser:

TruLaser 3030

posted 12/1/2014

———————————————————————————————————————————————————-

Check out the newly released TruLaser 2030 with a 4Kw solid state laser:

TruLaser 2030

posted 12/1/2014

———————————————————————————————————————————————————-

Check out the newly released TruPunch 2000:

TruPunch 2000

posted 12/1/2014

———————————————————————————————————————————————————-

Check out the newly released TruBend 3000:

TruBend3000

posted 12/1/2014

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *